Compare Products

2024 Toro Z Master 5000 52 in. Kohler EFI 25 hp
2024 Toro Z Master 5000 52 in. Kohler EFI 25 hp

Specs

General Information

Manufacturer
Toro
Toro
Model Year
2024
2024
Model
Z Master 5000 52 in. Kohler EFI 25 hp
Z Master 5000 52 in. Kohler EFI 25 hp
Model Code
72906
72906
Color
Red
Red

Body

Frame
Carrier - 3 x 1.5 in. x 10 ga. (7.6 x 3.8 cm x 10 ga.)
Carrier - 3 x 1.5 in. x 10 ga. (7.6 x 3.8 cm x 10 ga.)
Seat
Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
Rollover Protection (ROPS)
Folding; standard
Folding; standard
Safety Features
Front Bumper - Reinforced bull-nose
Front Bumper - Reinforced bull-nose

Drivetrain

Drive System
Hydraulic unitized pumps and wheel motors
Hydraulic unitized pumps and wheel motors
Travel Speed Forward
Ground / Transport - 10.0 mph (16.0 kph)
Ground / Transport - 10.0 mph (16.0 kph)
Wheels/Tires
Anti Scalp Wheels - 3 standard
Anti Scalp Wheels - 3 standard
Drive Tires
23 x 9.5 - 12 in. (58.4 x 24.1 - 30.5 cm)
23 x 9.5 - 12 in. (58.4 x 24.1 - 30.5 cm)
Steering Tires
Caster - 13 x 6.5 - 6 in. (33 x 16.5 - 15.2 cm) flat-free semi-pneumatic
Caster - 13 x 6.5 - 6 in. (33 x 16.5 - 15.2 cm) flat-free semi-pneumatic

Electrical

Hour Meter
Standard
Standard

Engine

Engine Make
Kohler®
Kohler®
Engine Model
Command Pro EFI
Command Pro EFI
Gross Horsepower

25 hp (18.4 kW)

The gross horsepower of this engine was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

25 hp (18.4 kW)

The gross horsepower of this engine was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

Displacement
747 cc
747 cc
Fuel System
EFI
EFI
Air Cleaner
Air Filter - Heavy-duty canister
Air Filter - Heavy-duty canister
Starter
Electric
Electric
Fuel Type
Gasoline
Gasoline
Fuel Capacity
12 gal. (45.4 l / 48 qt.)
12 gal. (45.4 l / 48 qt.)

Hydraulics

Hydraulic System
Fluid - Premium synthetic
Fluid - Premium synthetic

Measurements

Length
Box Dimensions - 91 in. (213.1 cm)
Box Dimensions - 91 in. (213.1 cm)
Width
Box Dimensions - 70.5 in. (179.1 cm)
Box Dimensions - 70.5 in. (179.1 cm)
Height
Box Dimensions - 52.5 in. (133.4 cm)
Box Dimensions - 52.5 in. (133.4 cm)
Mowing Width
52 in. (132 cm)
52 in. (132 cm)
Turning Radius
Zero
Zero
Mowing Height Range
1.0 - 5.5 in. (2.5 - 14.0 cm)
1.0 - 5.5 in. (2.5 - 14.0 cm)

Operational

Steering
Controls - 1-5/8 in. (4.1 cm) diameter grips; adjustable, dampened
Controls - 1-5/8 in. (4.1 cm) diameter grips; adjustable, dampened
Deck Construction
Design - 80-grade 7 ga. 52 in. (132 cm) TURBO FORCE® with bull-nose bumper
Design - 80-grade 7 ga. 52 in. (132 cm) TURBO FORCE® with bull-nose bumper
Deck Material
7 ga. steel
7 ga. steel
Discharge

Chute - Rubber

Adjustable Baffle - Standard, tools-free

Chute - Rubber

Adjustable Baffle - Standard, tools-free

Spindles

Bearings - Greaseless ball

Housings - 9 in. (22.9 cm) diameter cast aluminum

Bearings - Greaseless ball

Housings - 9 in. (22.9 cm) diameter cast aluminum

Blades
0.204 in. (0.5 cm) heat-treated steel
0.204 in. (0.5 cm) heat-treated steel
Blade Tip Speed
18,500 ft. / min. (5,638 m. / min.)
18,500 ft. / min. (5,638 m. / min.)

Other

Includes

Product Type - Zero turn mowers

Product Use - Commercial

Product Type - Zero turn mowers

Product Use - Commercial

Features

Features

  • DELUXE HANDCRAFTED SEAT WITH ARM RESTS: Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.
  • EXCLUSIVE TURBO FORCE DECK: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
  • 7-GAUGE HIGH-STRENGTH STEEL: The TURBO FORCE deck is constructed of 7 ga., high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10 ga. commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • SMARTER DESIGN IN A BULL-NOSE BUMPER: 7 ga. bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 0.25 in. (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • PATENTED ADJUSTABLE BAFFLE: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • SMOOTH, POWERFUL RESPONSE: The unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.
  • FOLDING ROLLOVER PROTECTION SYSTEM ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
  • OPERATOR INFORMATION CENTER: The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.
  • CAST ALUMINUM SPINDLE: Cools quickly for enhanced durability and performance.
  • HORIZON360® BUSINESS MANAGEMENT SOFTWARE.: Managing and growing your business is hard work. Using a business management software system shouldn't make it harder. That is why we built Horizon360. If you can type and point/click a mouse, you have all the skills required.

Features

  • DELUXE HANDCRAFTED SEAT WITH ARM RESTS: Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.
  • EXCLUSIVE TURBO FORCE DECK: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
  • 7-GAUGE HIGH-STRENGTH STEEL: The TURBO FORCE deck is constructed of 7 ga., high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10 ga. commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • SMARTER DESIGN IN A BULL-NOSE BUMPER: 7 ga. bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 0.25 in. (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • PATENTED ADJUSTABLE BAFFLE: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • SMOOTH, POWERFUL RESPONSE: The unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.
  • FOLDING ROLLOVER PROTECTION SYSTEM ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
  • OPERATOR INFORMATION CENTER: The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.
  • CAST ALUMINUM SPINDLE: Cools quickly for enhanced durability and performance.
  • HORIZON360® BUSINESS MANAGEMENT SOFTWARE.: Managing and growing your business is hard work. Using a business management software system shouldn't make it harder. That is why we built Horizon360. If you can type and point/click a mouse, you have all the skills required.