Compare Products

Toro Fixed Deck Gear Drive 48 in. Kawasaki FS481V 14.5 hp T-Bar
Toro Fixed Deck Gear Drive 48 in. Kawasaki FS481V 14.5 hp T-Bar

Specs

General Information

Manufacturer
Toro
Toro
Model
Fixed Deck Gear Drive 48 in. Kawasaki FS481V 14.5 hp T-Bar
Fixed Deck Gear Drive 48 in. Kawasaki FS481V 14.5 hp T-Bar
Model Code
39678
39678
Color
Red
Red

Drivetrain

Transmission/Drive
5-speed
5-speed
Travel Speed

Forward - 6.2 mph (10 km/h)

Reverse - Assist

Forward - 6.2 mph (10 km/h)

Reverse - Assist

Wheels/Tires

Drive Tires - 13 x 6.50 - 6 in. (33 x 15.2 - 16.5 cm)

Caster Tires - 9 x 3.50 - 4 in. (23 x 9 - 10 cm) Flat-free

Drive Tires - 13 x 6.50 - 6 in. (33 x 15.2 - 16.5 cm)

Caster Tires - 9 x 3.50 - 4 in. (23 x 9 - 10 cm) Flat-free

Brakes
Band - 6 in. (15 cm)
Band - 6 in. (15 cm)

Engine

Engine Make
Kawasaki®
Kawasaki®
Engine Model
FS481V
FS481V
Horsepower

14.5 hp

The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower

14.5 hp

The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower

Displacement
603 cc
603 cc
Air Cleaner
2-stage
2-stage
Starter
Recoil
Recoil
Fuel Capacity
5 gal. (19 l)
5 gal. (19 l)

Measurements

Length
72.3 in. (182 cm)
72.3 in. (182 cm)
Width
49.6 in. (126 cm)
49.6 in. (126 cm)
Height
41 in. (104 cm)
41 in. (104 cm)
Weight
498 lb. (226 kg)
498 lb. (226 kg)
Mowing Height Range
1 - 4-1/4 in. in 1/8 in. increments (2.5 - 10.8 cm in 3 mm increments)
1 - 4-1/4 in. in 1/8 in. increments (2.5 - 10.8 cm in 3 mm increments)
Mowing Width
48 in. (122 cm)
48 in. (122 cm)

Operational

Steering
Controls - T-Bar
Controls - T-Bar
Deck Construction
Design - 48 in. (122 cm) TURBO FORCE
Design - 48 in. (122 cm) TURBO FORCE
Spindles
Housings - Cast iron with 9-3/8 in. (24 cm) base
Housings - Cast iron with 9-3/8 in. (24 cm) base
Blades
3
3
Blade Tip Speed
18,500 ft. / min. (5,639 m. / min.)
18,500 ft. / min. (5,639 m. / min.)
Discharge

Side

Adjustable - Standard

Chute - High-performance 5/16 in. (8 mm) rubber

Side

Adjustable - Standard

Chute - High-performance 5/16 in. (8 mm) rubber

Features

Features

  • T-BAR STEERING CONTROLS: Exclusive Toro T-Bar steering system is easy to use and ergonomically designed to reduce operator fatigue. Great for tracking in large open spaces and also maneuvering around obstacles. All around an intuitive control system.
  • EXCLUSIVE TURBO FORCE DECK: High-capacity 7/10 guage TURBO FORCE deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • PATENTED ADJUSTABLE BAFFLE: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • SMARTER DESIGN IN A BULL-NOSE BUMPER: 7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • RUGGED SPINDLE ASSEMBLY: Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Built with maintenance-free sealed ball bearings.
  • EXTENDED LIFE DRIVE SYSTEM: Extended life drive system with Husqvarna Peerless 700 series transmission, featuring a 9-spline drive coupler.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Features

  • T-BAR STEERING CONTROLS: Exclusive Toro T-Bar steering system is easy to use and ergonomically designed to reduce operator fatigue. Great for tracking in large open spaces and also maneuvering around obstacles. All around an intuitive control system.
  • EXCLUSIVE TURBO FORCE DECK: High-capacity 7/10 guage TURBO FORCE deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • PATENTED ADJUSTABLE BAFFLE: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • SMARTER DESIGN IN A BULL-NOSE BUMPER: 7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • RUGGED SPINDLE ASSEMBLY: Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Built with maintenance-free sealed ball bearings.
  • EXTENDED LIFE DRIVE SYSTEM: Extended life drive system with Husqvarna Peerless 700 series transmission, featuring a 9-spline drive coupler.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.