Compare Products

Toro Fixed Deck Gear Drive 48 in. Kawasaki FS481V 14.5 hp Pistol Grip
Toro Fixed Deck Gear Drive 48 in. Kawasaki FS481V 14.5 hp Pistol Grip

Specs

General Information

Manufacturer
Toro
Toro
Model
Fixed Deck Gear Drive 48 in. Kawasaki FS481V 14.5 hp Pistol Grip
Fixed Deck Gear Drive 48 in. Kawasaki FS481V 14.5 hp Pistol Grip
Model Code
39638
39638
Color
Red
Red

Drivetrain

Transmission/Drive

Drive System - 5-Speed

Transmission - 5-speed gearbox with 9 spline coupler

Drive System - 5-Speed

Transmission - 5-speed gearbox with 9 spline coupler

Travel Speed
Forward Ground / Transport - Up to 6.2 mph (9.9 kph)
Forward Ground / Transport - Up to 6.2 mph (9.9 kph)
Wheels/Tires

Caster Tires - 9 x 3.5 - 4 in. (23 x 9 - 10 cm) flat-free

Drive Tires - 13 x 6.5 - 6 in. (33 x 15 - 16.5 cm)

Caster Tires - 9 x 3.5 - 4 in. (23 x 9 - 10 cm) flat-free

Drive Tires - 13 x 6.5 - 6 in. (33 x 15 - 16.5 cm)

Brakes
6 in. (15 cm) band
6 in. (15 cm) band

Engine

Engine Make
Kawasaki®
Kawasaki®
Engine Model
FS481V
FS481V
Horsepower

14.5 hp

The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower

14.5 hp

The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower

Displacement
603 cc
603 cc
Air Cleaner
Air Filter - 2-stage
Air Filter - 2-stage
Starter
Pull cord, recoil
Pull cord, recoil
Fuel Type
Gasoline
Gasoline
Fuel Capacity
5 gal. (18.9 l / 20 qt.)
5 gal. (18.9 l / 20 qt.)

Measurements

Length
Box Dimensions - 91 in. (231.1 cm)
Box Dimensions - 91 in. (231.1 cm)
Width
Box Dimensions - 62.5 in. (158.8 cm)
Box Dimensions - 62.5 in. (158.8 cm)
Height
Box Dimensions - 48 in. (121.9 cm)
Box Dimensions - 48 in. (121.9 cm)
Mowing Height Range
1.0 - 4.25 in. (2.5 - 10.8 cm)
1.0 - 4.25 in. (2.5 - 10.8 cm)
Mowing Width
48 in. (122 cm)
48 in. (122 cm)

Operational

Steering
Controls - Pistol grips
Controls - Pistol grips
Deck Construction
Design - 48 in. (122 cm) TURBO FORCE
Design - 48 in. (122 cm) TURBO FORCE
Spindles
Housings - 9.375 in. (23.8 cm) diameter cast iron
Housings - 9.375 in. (23.8 cm) diameter cast iron
Blades
3
3
Blade Tip Speed
18,000 ft. / min. (5,486 m. / min.)
18,000 ft. / min. (5,486 m. / min.)
Discharge

Side

Adjustable - Standard

Adjustable Baffle - Standard

Chute - High-performance 5/16 in. (8 mm) rubber

Side

Adjustable - Standard

Adjustable Baffle - Standard

Chute - High-performance 5/16 in. (8 mm) rubber

Features

Features

  • PISTON GRIP CONTROL SYSTEM: The individual handles make it easier to control tracking long straight lines. The release to go interlock, reduces operator fatigue.
  • EXCLUSIVE TURBO FORCE DECK: High-capacity 7/10 guage TURBO FORCE deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • PATENTED ADJUSTABLE BAFFLE: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • SMARTER DESIGN IN A BULL-NOSE BUMPER: 7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • UNIQUE UNDER-THE-DECK SKID PLATE: Reduces scalping when traveling over uneven terrain and to avoid catching while loading onto trailers.
  • RUGGED SPINDLE ASSEMBLY: Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Built with maintenance-free sealed ball bearings.
  • EXTENDED LIFE DRIVE SYSTEM: Extended Life Drive SystemExtended life drive system with Husqvarna Peerless 700 series transmission, featuring a 9-spline drive coupler.
  • HORIZON360® BUSINESS MANAGEMENT SOFTWARE: Managing and growing your business is hard work. Using a business management software system shouldn't make it harder. That is why we built Horizon360. If you can type and point/click a mouse, you have all the skills required.

Features

  • PISTON GRIP CONTROL SYSTEM: The individual handles make it easier to control tracking long straight lines. The release to go interlock, reduces operator fatigue.
  • EXCLUSIVE TURBO FORCE DECK: High-capacity 7/10 guage TURBO FORCE deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • PATENTED ADJUSTABLE BAFFLE: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • SMARTER DESIGN IN A BULL-NOSE BUMPER: 7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • UNIQUE UNDER-THE-DECK SKID PLATE: Reduces scalping when traveling over uneven terrain and to avoid catching while loading onto trailers.
  • RUGGED SPINDLE ASSEMBLY: Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Built with maintenance-free sealed ball bearings.
  • EXTENDED LIFE DRIVE SYSTEM: Extended Life Drive SystemExtended life drive system with Husqvarna Peerless 700 series transmission, featuring a 9-spline drive coupler.
  • HORIZON360® BUSINESS MANAGEMENT SOFTWARE: Managing and growing your business is hard work. Using a business management software system shouldn't make it harder. That is why we built Horizon360. If you can type and point/click a mouse, you have all the skills required.